Ball & Plug Valves

A VALVE IS A DEVICE THAT REGULATES, DIRECTS OR CONTROLS THE FLOW OF A FLUID BY OPENING, CLOSING, OR PARTIALLY OBSTRUCTING VARIOUS PASSAGEWAYS.

Valves are technically valves fittings, but are usually discussed as a separate category

DBSF (DBB Floating Solit Body Ball Valve)

Materials i accordance to NACE MR 01.75.
DBSF
Catalog

Spec.

  • Split Body-All forged construction.
  • Soft/ Metal Seated.
  • Self Relieving
  • Anti Blow-Out stem.
  • Fire safe API 6FA-API 607 ISO 10497.
  • Antistatic device.
  • Materials in accordance to NACE MR 01.75.

DBST(DBB Trunnion Side Entry Ball Valve)

Materials in accordance to NACE MR 01.75.

Spec.

  • Bolted Body-All Forged Construction.
  • Split Body.
  • Soft / Metal Seated.
  • Self Relieving or Double Piston Effect Seat Anti Blow-Out stem.
  • Bleed Type (Needle or Globe valve).
  • Fire safe API 6FA-API 607 ISO 14097.
  • Antistatic device.
  • Emergency sealant injection to stem & seat.
  • Materials in accordance to NACE MR 01.75
  • Above ground installation.
DBST
Catalog

DBTT(DBB Trunnion Top Entry Ball Valve)

Materials in accordance to NACE MR 01.75.
DBTT
Catalog

Spec.

  • Bolted Bonnet -Cast Body/Forged Bonnet and Trim (forged body available on request).
  • Soft/Metal Seated.
  • Self Relieving or Double Piston Effect Seat Anti Blow-Out stem.
  • Bleed Type (Needle or Globe valve).
  • Above ground installation.
  • Materials in accordance to NACE MR 01.75.
  • Emergency sealant injection to stem & seat.
  • Antistatic device.
  • Fire safe API 6FA-API 607 ISO 14097.
  • Full In-Line Maintenance either with vertical and horizontal stem.

VBSF(Floation Split Body Ball Valve)

Materials in accordance t NACE MR 01.75.

Spec.

  • Split Body – All forged construction.
  • Soft/ Metal Seated.
  • Self Relieving.
  • Anti Blow-Out stem.
  • Materials in accordance to NACE MR 01.75.
  • Antistatic device.
  • Fire safe API 6FA-API 607 ISO 10497.
VBSF
Catalog

Need help? Ready to Help you with Whatever you Need!
Tel : +82 (55) 338 0114

Contact US

VBST(Trunnion Side Entry Ball Valve)

Materials in accordance to NACE MR 01.75.
CBST
Catalog

Spec.

  • Bolted Body – All Forged Construction.
  • Soft/Metal Seated.
  • Self Relieving or Double Piston Effect.
  • Anti Blow-Out Stem
  • Above/ Under Ground Installation.
  • Materials in Accordance to NACE MR 01.75
  • Emergency Sealant Injection to Stem & Seats.
  • Antistatic Device.
  • Fire Safe API 6FA-API 607 ISO 14097.
  • Double Block & Bleed

VBTT(Trunnion Top Entry Ball Valve)

Materials in accordance to NACE MR 01.75.

Spec.

  • Bolted Bonnet – Cast Body/Forged Bonnet and Trim (forged body available on request).
  • Soft/Metal Seated.
  • Self Relieving or Double Piston Effect Seat
  • Anti Blow-Out stem.
  • Full in-line maintenance, either with vertical and horizontal stem.
  • Above / below ground installation
  • Materials in accordance to NACE MR 01.75
  • Emergency sealant injection to stem & seats.
  • Antistatic device.
  • Fire Safe API 6FA API 607 ISO 14097
  • Double Block & Bleed.
VBTT
Catalog

VBWB(Trunnion Welded Body Ball Valve)

Materials in accordance to NACE MR 01.75.
VBWB
Catalog

Spec.

  • Welded Body – Cast or Forged body and closure.
  • Soft/Metal Seated
  • Self Relieving or Double Piston Effect Seat.
  • Anti Blow-Out stem.
  • Above/under ground installation
  • Materials in accordance to NACE MR 01.75.
  • Emergency sealant injection to stem & seats
  • Antistatic device.
  • Fire Safe API 6FA API 607 ISO 14097.
  • Double Block & Bleed.

Need help? Ready to Help you with Whatever you Need!
Tel : +82 (55) 338 0114

Contact US

V81

Pressures rating of 68.9 bar (1000 psig) and 137 bar (2000 psig)
V81
Catalog

Spec.

  • Stainless Steel and Brass
  • 1/8 to 1 in. Hoses
  • Male Adapter, Female Adapter
  • Tube Adapter
  • DK-Lok Tube Fitting Adapter
  • Hose Sleeve

Brief Description

  • DK-Lok Hose Adapter Fittings are designed for use with soft plastic or rubber tubing.
  • Standard hose barb design is for use with hose sleeve or hose clamp.
  • DK-Lok hose adapter fittings are reusable
  • Stainless steel and brass construction.
  • Stainless steel and brass construction.

V82

Pressure Rating up to 3,000psig

Spec.

  • Working Pressure : 3,000 psig
  • Stainless Steel and Brass
  • 2-way and 3-way actuation
  • DK-Lok 1/16 to 3/4 in. OD
  • Pipe thread 1/8 to 1/2 in.

Brief Description

  • V82 series Ball valves are classfied into 3 types according to the temperature range in use. V82 series is for general use and VL82 is adequate to the low temperature range. VG82 can be used in the widen temperature range from low to high temperature. The exact temperature range of each type is referred to the technical data of the type.
V82
Catalog
2D / 3D

V83

Pressure Rating up to 3,000 psig (206 bar)Features
V83
Catalog
2D / 3D

Spec.

  • Working Pressure : 3,000 psig
  • Stainless Steel and Carbon Steel
  • DK-Lok 1/4 to 1 in. OD
  • Pipe thread 1/8 to 1 in.

Brief Description

  • Pressure and temperature compensation seat design.
  • Swing-out design for fast and easy maintenance with the valve in-line.
  • Chevron packing design.
  • 2-way (on-off) valves with quarter-turn actuation.

Need help? Ready to Help you with Whatever you Need!
Tel : +82 (55) 338 0114

Contact US

V86

Pressure Rating up to 689 bar (10,000psig)

Spec.

  • 2-way on-off Valves
  • 3-way on-off Valves
  • Working Pressure : 10,000 psig
  • Stainless Steel and Carbon Steel
  • DK-Lok 1/4 to 1 in. OD
  • Pipe thread 1/4 to 1 in.

Brief Description

  • Blowout proof design with internally loaded stem.
  • Handle indicates the flow direction.
  • Positive stop with a robust stop pin.
  • Positive stop with a robust stop pin.
  • Various end ports including DK-Lok tube port.
  • Various flow control with side and bottom inlet port on 3-way diverter valves
  • Designed to control fluids in full open or full closed position.
V86
Catalog

VH86

High Pressure Multi Purpose Ball ValvesFeatures
VH86
Catalog
2D / 3D

Spec.

  • 2-way bi-directional Valves
  • 3-way diverter Valves
  • Working Pressure : 6,000 psig
  • Stainless Steel
  • DK-Lok 1/8 to 3/4 in. OD
  • DK-Lok 3mm to 16mm OD
  • Pipe thread 1/8 to 1/2 in.

Brief Description

  • High flow in a compact design.
  • High pressure capacity designed for blow-out proof with internally loaded ball stem.
  • Micro-finished ball provides a positive seal.
  • 90 degree actuation for 2-way and 180 degree actuation for 3-way ball valves.
  • Panel mounting as standard
  • Chevron stem seal, adjustable with the handle disassembled.
  • Handle indicates flow direction.
  • Low operating torques and positive handle stops.
  • Optional pneumatic actuation.

VT86

VT86 Series Pressure Rating up to 413bar (6,000 psig)

Spec.

  • 2-way on-off Valves
  • 3-way on-off Valves
  • Working Pressure : 6,000 psig for VT86 Series 10,000 psig for VTH86 Series
  • Stainless Steel
  • DK-Lok 1/4 to 1/2 in.

Brief Description

  • The Trunnion ball valve is featured by blowout-proof
    design with cylindrical extensions at the top and bottom of the ball.
  • The trunnion prevents the ball from shifting and permits the ball to rotate on a vertical axis.
  • Integral ball stem machined from single piece of bar stock eliminates the backlash during handle actuation
  • Panel mounting nut is standard permitting valve to panel or actuator.
  • Designed to control fluids in full open or full closed position.
VT861
Catalog
2D / 3D

Need help? Ready to Help you with Whatever you Need!
Tel : +82 (55) 338 0114

Contact US

V87

Pressure Rating up to 500 bar(7,250 psig)
V87
Catalog

Spec.

  • Up to 7,250 psig (500bar)
  • Up to 100℃ (212℉)
  • DIN 1,4404, SS316L
  • DIN O.D 6mm ~ 38mm
  • Pipe thread 1/8 ~ 1 in.
  • Ball valve to DIN standard

Brief Description

  • Positive stop with robust stop pin
  • Various end ports including DIN Standard port
  • Hydraulic fluids
  • Compressed Air
  • Fuel oil system

V23

Pressure Rating up to 3,000 psig (206 bar)

Spec.

  • Working Pressure : 3,000 psig
  • Stainless Steel and Brass
  • Stainless Steel and Brass
  • DK-Lok 1/8 to 1/2 in. OD

  • Pipe thread 1/8 to 1/2 in.

Brief Description

  • Positive shut-off, high flow capacity
  • Quick quarter-turn operation
  • Unique forward flow throttling
  • Low torque operation
  • Unidirectional flow
  • Optional downstream vent
V23 SS316
Catalog

Key Operation Ball Valve

Pressure Rating up to 68.9 bar(1,000 psig)
V81 Series Ball Valve Option Key Lock Type Handle
Catalog

Spec.

  • Size: 1/2″~1″, 15A~25A
  • Handle Type: Blue & Red color
  • Body Material: SS316
  • Pressure Rating: 68.9bar (1,000 psig)

Brief Description

  • Compact barstock construction for high integrity
  • Blow-out proof design with internally loaded stem
  • Floating Ball design providing seat wear compensation
  • Micro-finished ball ensures a leak-tight shut-off on pressure
  • Standard PTFE seat material